Dynaudio

Dynaudio Evoke 10 Bookshelf Speakers (Pair)

$2,079.00$2,599.00
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)
  • Dynaudio  Evoke 10 Bookshelf Speakers (Pair)

Free shipping Australia-wide for orders over $500


Putting together a custom system? Click 'Add to quote' below, add any other products you’re interested in, and get a customised quote.

Plug them in, turn them up, and then get a friend round. We’d put money on your pal asking where the rest of the speakers are. That’s when you smile, shrug and invite them to sit down in the sweet-spot on your sofa. And then turn it up a bit more. We’ve been creating speakers that perform out of all proportion to their physical size for over 40 years, and Evoke 10 is no exception. These are serious hi-fi… built for serious entertainment. Classic Dynaudio heritage… with a twist Each speaker’s single 14cm long-throw mid/bass driver is made from MSP (Magnesium Silicate Polymer), just like all Dynaudio speakers have used for decades. They use new surrounds to extend their throw, their frequency response and their low-frequency dynamics – all while maintaining stellar midrange performance. Want to know the woofer’s secrets? The diaphragm is 0.4mm thin, which provides exactly the right combination of lightness, stiffness and damping to ensure optimum performance. It’s made of one piece (the dust-cap is part of the playing surface), and is bonded directly to the rigid glass-fibre voice-coil former directly under the Balance Ribs you’ll see around the centre dome. That means the whole unit moves as one, in a predictable (and carefully tuned) way, for a performance that strikes the ideal balance between bass and midrange. The 38mm voice-coil itself is made from aluminium, making it extremely light. That means we can use more windings. More windings gives us more control over the cone’s movement, which means more control over the sound – even at high volumes and high frequencies. It’s kept stable, centred and true by the Nomex spider (the circular spring assembly that stops the cone moving when it shouldn’t, and lets it move when it should). And the whole assembly is driven by one of our new, powerful strontium carbonate Ferrite+ ceramic magnet systems.

Specification sheet for Evoke 10
Sensitivity: 84dB (2.83V/1m)
IEC power handling: 160W
Impedance: 6 Ω
Frequency response (±3dB): 47Hz–23kHz
Box principle: Bass reflex rear ported
Crossover: 2-way
Crossover frequency: 1400Hz
Crossover topology: 2nd order
Specification sheet for Evoke part 1
Woofer: 14cm MSP cone
Tweeter: 28mm Cerotar with Hexis
Weight: 6.7kg/14.8lb
Dimensions (W x H x D): 180x315x266mm
  7.1x12.4x10.5in
Dimensions with feet/grille (W x H x D): 180x315x277mm
  7.1x12.4x10.9in

Room Design Service

Have the cost of your room design deducted from any equipment purchased

Installation Service

Ask our friendly team about our installation service

Visit Our Showroom

121 Brunswick St, Fortitude Valley, Brisbane QLD 4006