Dynaudio

Dynaudio Emit 25c

$1,099.00
  • Dynaudio Emit 25c
  • Dynaudio Emit 25c
  • Dynaudio Emit 25c
  • Dynaudio Emit 25c
  • Dynaudio Emit 25c
  • Dynaudio Emit 25c
  • Dynaudio Emit 25c

Free shipping Australia-wide for orders over $500


Putting together a custom system? Click 'Add to quote' below, add any other products you’re interested in, and get a customised quote.

It’s been said that the soundtrack is up to 80 per cent of the movie-going experience. And the centre speaker is the most crucial part of that. Say ‘hej’ to Emit 25C…

It could be argued that the centre channel is the most important part of any surround-sound system. It’s where the lion’s share of dialogue comes from in a movie, and it’s where the focal point of the music often comes from in a multi-channel mix. It’s crucial to get it right.

Emit 25C gets it right.

It’s essentially an Emit 30, turned on its side, with the mid/bass drivers placed either other side of the tweeter. The drivers are the same; the crossover is the same, with a different box and port-tuning. But that’s not doing it a disservice; quite the opposite. It means you get total consistency between the centre speaker and the two flanking it (whether those are Emit 10s, 20s, 30s or even 50s), along with any others you place around your listening position.

High-quality mid/bass drivers

Emit 25C uses the same 14cm MSP woofers as Emit 10 and Emit 30. MSP stands for Magnesium Silicate Polymer. It’s a material we developed decades ago, and have been refining ever since for use in all our most legendary speakers (including Confidence, Contour, Heritage Special and many more). MSP provides exactly the right combination of lightness, stiffness and damping to reproduce your material with all the detail the artist wants you to hear. Each cone is made in one piece, with an integrated dust-cap. The ‘balance ribs’ you’ll see in the centre are bonded directly to the voice-coil, so the whole mechanism moves as one piece – bringing with it immense control and detail over its sound.

Sensitivity: 87dB (2.83V/1m)
IEC power handling: 180 watt
Impedance: 4 Ω
Frequency response (± 3 dB): 53Hz - 25kHz (-6 dB 46 Hz - 35 Khz)
Box principle: Bass reflex rear double flared port
Crossover: 2.5-way
Crossover frequency: 1000/3500Hz
Crossover topology: 1ST order tweeter / 2nd order woofer
Specification sheet for Emit part 1
Midrange / Woofer: 14 cm MSP
Woofer: 14 cm MSP
Tweeter: Cerotar soft dome with Hexis
Weight: 10.98 Kg / 24.2 lb
Dimensions (W x H x D): 550 X 170,1 X 271,5 mm
  21.7 X 6.7 X 10.7 in
Dimensions with feet/grille (W x H x D): 550 X 170,1 X 284,5 mm
  21.7 X 6.7 X 11.2 in

Room Design Service

Have the cost of your room design deducted from any equipment purchased

Installation Service

Ask our friendly team about our installation service

Visit Our Showroom

121 Brunswick St, Fortitude Valley, Brisbane QLD 4006