With our new A10 CLASSIC amplifier, our goal was to offer an audiophile integrated amplifier inspired by the renowned X-i1100, celebrated for its musicality and liveliness.
The A10 is fully future-proof and easy to use. While its classic design remains timeless, it combines an ECC81/12AT7 tube preamplifier with a 2x130W Class AB push-pull amplifier.
In short, the best of both worlds!
Modernity is also evident in the microprocessor that manages all the functions accessed via the rotary encoder; a long or short press opens the menus.
The inputs are: six analog RCA inputs, including a moving magnet (MM) phono input with three capacitance settings (100, 200, 320 pF), a balanced XLR line input, five digital inputs (three optical), an S/PDIF input, and a USB audio input, plus a connector for an optional XFTB01 or XFTB02 aptX Bluetooth receiver.
Key Features
- ECC81/12AT7 tube preamplification
- 2x 130W @ 8Ω, Class AB amplification with High Bias mode
- 6x analogue RCA inputs (including MM phono) + XLR input
- 2x HDMI (1x ARC), 3x Optical, 1x Coaxial, 1x USB Audio, 1x USB-A input RRP
Optional XFTB01 aptX or XFTB02 aptX HD Bluetooth module
- Pre-out/main in, 2x subwoofer out, Record out
-
-
Output power 8Ω2 x 130 W RMS
-
Output power 4Ω2 x 190 W RMS
-
Bandwidth(-3dB) 10Hz-35kHz
-
Tone+/- 10 dB
-
Distortion< 0.1%
-
Signal-to-noise ratio> 90 dB
-
Separation of the channels> 70 dB
-
Input impedance47KΩ
-
Phono input impedance47KΩ
-
Amplifier input level< 300mV
-
Phono MM/MC Input Level2.5mV
-
Mains voltage115-230V
-
Maximum consumption.400
-
Transformer1
-
Width430 mm
-
Height175 mm
