Krix

Krix Equinox 5.1 Pack

$3,425.00$4,030.00
  • Krix Equinox 5.1 package deal
  • Krix Equinox 5.1 package deal
  • Krix Graphix
  • Krix Equinox
  • Krix seismix 1
  • krix colours

Free shipping Australia-wide for orders over $500


Putting together a custom system? Click 'Add to quote' below, add any other products you’re interested in, and get a customised quote.

Package Includes

Krix Equinox MK4 x 2 Pair's (Front & Rears)

Krix Graphix (Centre)

Krix Seismix 1 MK6

Krix is an Australian owned and operated company based in Adelaide, with more than 45 years experience they mean business when it comes to theatre - that's why they do over 80% of Australian commercial cinemas!

Small bookshelf speakers with big sound? No problem! Just have a listen, reinforced by the Seismix 1 you are sure to be impressed!

 

Krix Equinox

Frequency Range

45Hz-40kHz in room response

Power Handling
20 – 120 Watts RMS recommended amplifier power

Sensitivity
88dB for 2.83 volts at 1 metre

Impedance
Nominally 6 Ohms (minimum 3.6 Ohms)

Configuration
2-way

Enclosure Type
Bass reflex, rear vented

Dimensions
295mm high x 175mm wide x 235mm deep

Low Frequency Driver
Cast aluminium basket with a nominal 130mm (5″) doped curvilinear paper cone. 30mm (1.2″) vented magnet voice coil wound on high temperature kapton former, with copper shorting ring

High Frequency Driver
26mm (1″) dual concentric diaphragm with wave-guide centre plug for controlled directivity. Non-reflective dual chambered magnet structure with copper shorting ring to lower distortion

Input Terminals
Gold plated binding posts

Weight
6kg each

Krix Graphix

Frequency Range

45Hz-40kHz in room response

Power Handling
20 – 160 Watts RMS recommended amplifier power

Sensitivity
89dB for 2.83 volts at 1 metre

Impedance
Nominally 6 Ohms (minimum 4.3 Ohms)

Configuration
D-Appolito, 2-way

Enclosure Type
Bass reflex, front vented

Dimensions
180mm high x 450mm wide x 300mm deep

Low Frequency Drivers
Fibre reinforced moulded polymer baskets with 2 x nominal 130mm (5″) doped paper cones. 25mm (1″) voice coil wound on high powered aluminium former, with vented magnet assembly

High Frequency Driver
26mm (1″) dual concentric diaphragm with wave guide centre plug for controlled directivity. Neodymium magnet

Input Terminals
Gold plated binding posts

Weight
10kg each

Krix Seismix 1

Frequency Range

25Hz-200Hz in room response

Amplifier Power
350 Watts RMS, 700 Watts maximum instantaneous power

Output
116dB maximum SPL in room response

Inputs

Stereo line level RCA

Enclosure Type
Bass reflex, down firing vent

Dimensions
375mm high x 295mm wide x 320mm deep

Low Frequency Driver
Nominal 200mm (8”) diameter doped paper cone driver, 38mm (1.5″) voice coil wound on high powered aluminium former, with vented magnet assembly

Power On/Off
Signal sensing, 15 minute delay before switching to standby after no input signal

Phase Select
0º to 180º continuously variable (relative to input signal)

Low Pass Filter

50Hz-200Hz or bypass

Weight

11kg each

 

If you are after a different colour then please reach out to us on either of the below:

07-3552-7000

sales@livingsound.com.au


Room Design Service

Have the cost of your room design deducted from any equipment purchased

Installation Service

Ask our friendly team about our installation service

Visit Our Showroom

121 Brunswick St, Fortitude Valley, Brisbane QLD 4006